HEAT SEAL Model: HS-115 & HS-115T || Combination L-Bar Sealer & Heat Tunnel

Manufacturer
HEAT SEAL

Model
HS-115 & HS-115T

Year
2001

Stock #
90-3459

Condition
Excellent

Specifications

Manufacturer HEAT SEAL, LLC.
Model HS-115 & HS115T - Series W || Hot Wire Seal Jaw
Serial No. L1A15126 & LKA15127
L-Bar Seal Area 20”L x 15”W
Film Size 17” Wide (430mm)
Load Station Height 35” High (890mm)
Tunnel Passage Dims 20”L x 14.5”W x 6”H (530mm x 370mm x 152mm)
Conveyor Speed 0-20FPM (Up to .1m/s)
Electrical Specs 115VAC, 20amps, 1-Phase, 60Hz
Power Usage Tunnel: 2000Watts Conveyor Belt: 500Watts
Manufacture Date 2/1/2002
Overall Machine Dims 24”W x 85”L x 50”H (Approx) Mounted on casters for easy mobility
Weight 375lbs (approx) (159kg) (approx.)
Seller Note: Unit is USED but in LIKE EXCELLENT CONDITION. Very little scratching/blemishes can be seen on the surfaces of the L-Bar Sealer, but none affecting the unit intended use. The unit was removed a working environment and was functioning as intended when removed from service. Unit has been tested and run at our facility. The unit is being sold AS-IS, WHERE-IS, AS-SHOWN. Pictures and videos are of the actual unit being purchased. If the buyer has any questions, please feel free to ask. As always, buyer is welcome to personally inspect and test the unit at our facilities.

Equipped With

HEAT SEAL Model: HS-115 & HS-115T 

Combination L-Bar Sealer & Heat Tunnel

Manufacturer:

HEAT SEAL, LLC.

Model:

HS-115 & HS115T - Series W  ||  Hot Wire Seal Jaw

Serial No.:

L1A15126 & LKA15127

L-Bar Seal Area:

20”L x 15”W

Film Size:

17” Wide (430mm)

Load Station Height:

35” High (890mm)

Tunnel Passage Dims:

20”L x 14.5”W x 6”H (530mm x 370mm x 152mm)

Conveyor Speed:

0-20FPM (Up to .1m/s)

Electrical Specs:

115VAC, 20amps, 1-Phase, 60Hz

Power Usage:

Tunnel: 2000Watts     Conveyor Belt: 500Watts

Manufacture Date:

2/02

Overall Dimensions:

24”W x 85”L x 50”H (Approx) Mounted on casters for easy mobility

Weight:

375lbs (approx) (159kg) (approx.)

 

 

Seller Notes:

Unit is USED but in LIKE EXCELLENT CONDITION. Very little scratching/blemishes can be seen on the surfaces of the L-Bar Sealer, but none affecting the unit's intended use. The unit was removed a working environment and was functioning as intended when removed from service. Unit has been tested and run at our facility with no issues noted. The unit is being sold AS-IS, WHERE-IS, AS-SHOWN. Pictures and videos are of the actual unit being purchased. If the buyer has any questions, please feel free to ask. As always, buyer is welcome to personally inspect and test the unit at our facilities. 

 

 

 

 

Videos