Sepha MediScan | Non-Destructive Package Leak Tester

Manufacturer
SEPHA

Model
MediScan T603-001-002

Year
2017

Stock #
90-SMDS

Condition
Excellent

Specifications

Manufacturer Sepha
Model MediScan T603-001-002
Serial No. 603-018
Test Area 250mm (L) X 200mm (W) X 100mm (D) | 9.9”L x 7.8”W x 3.9”D (APPROX)
Test Cycle From 20 seconds per test cycle
Tooling Change Over No Tooling Required
Operation Type Semi-Automatic
Configuration 2x USB | 1x Ethernet Port
Controls / HMI 10” LCD Touch Display
Air Specs Minimum 200L/min @ 0.6Mpa | 7cfm/min @ 88psi
Machine Construction 304 Stainless Steel Case
Electrical Specs 110/230V / Single Phase / 50/60Hz
Overall Machine Dims 400mm (L) X 700mm (W) X 500mm (D) | 16”L x 28”W x 20”D
Manufacture Date Jan. 2017
Weight 90kg / 200lbs (approx)
Highlights Non-Destructive Seal Integrity & Leak Testing | No tooling required, making it highly flexible | Tabletop Device | Easy Operator use via touchscreen interface | Fully Validated System | Fast & efficient test speed
Seller Note: Unit is USED. This UNIT IS VERY GOOD CONDITION. This unit has been powered up and boots properly into the HMI portion. We have not been able to test the unit. Unit shows very little signs of visible surface wear, scratching, some paint can be seen peeling on the outside of the base, otherwise not affecting intended use of the unit. What you see in the picture is what is included in sale. Unit is being sold AS-IS, WHERE-IS, AS SHOWN. Pictures are of the actual unit being purchased. If the buyer has any questions, please feel free to ask. Buyer is always welcome to inspect the unit before purchasing at our location.

Equipped With

Sepha MediScan

Non-Destructive Package Leak Tester 

Manufacturer:

Sepha

Model:

MediScan  T603-001-002

Serial No.:

603-018

Test Area:

250mm (L) X 200mm (W) X 100mm (D)  |  9.9”L x 7.8”W x 3.9”D (APPROX)

Test Cycle:

From 20 seconds per test cycle

Tooling Change Over:

No Tooling Required

Operation:

Semi-Automatic

Configuration:

2x USB | 1x Ethernet Port

Controls / HMI:

10” LCD Touch Display 

Air Specification:

Minimum 200L/min @ 0.6Mpa  |  7cfm/min @ 88psi

Construction:

304 Stainless Steel Case

Electrical Specs:

110/230V / Single Phase / 50/60Hz

Overall Machine Dims:

400mm (L) X 700mm (W) X 500mm (D)  |   16”L x 28”W x 20”D

Manufactured Date:

1/17

Weight:

90kg / 200lbs  (approx)

 

 

Highlights:

  • Non-Destructive Seal Integrity & Leak Testing
  • No tooling required, making it highly flexible
  • Tabletop Device
  • Easy Operator use via touchscreen interface
  • Fully Validated System
  • Fast & efficient test speed

 

 

Seller Note:

Unit is USED. This UNIT IS VERY GOOD CONDITION. This unit has been powered up and boots properly into the HMI portion. We have not been able to test the unit. Unit shows very little signs of visible surface wear, scratching, some paint can be seen peeling on the outside of the base, otherwise not affecting intended use of the unit. What you see in the picture is what is included in sale. Unit is being sold AS-IS, WHERE-IS, AS SHOWN. Pictures are of the actual unit being purchased. If the buyer has any questions, please feel free to ask. Buyer is always welcome to inspect the unit before purchasing at our location.

 

 

 

 

Videos