| Manufacturer | Kalamazoo Industries, Inc. |
| Model | K16-18 |
| Serial No. | 415353 |
| Cutting Capacity | 3” Solid & 4” Mild Steel w/ the correct cutoff wheel/blade |
| Table Dimension | 16”W x 28”D |
| Table Vise | Fast, Foot Operated chain vise |
| Saw Stand | Rigid Steel Base |
| Abrasive Wheel Size | 16” or 18” Diameter wheel |
| Wheel RPM | 2500 Spindle RPM |
| On/Off Switch | Magnetic On/Off Switch |
| Spark Chute | Efficient Spark Chute |
| Drive Belt | Heavy Duty Steel Belt — With Heavy Duty Wheel & Belt Guards |
| Motor Specs | 10Hp TEFC 3-Phase |
| Electrical Specs | 240V, 3-Phase, 24amps, 50/60 Hz (unit is already wired for this voltage) |
| Weight | Approx. 620lbs (shipping weight) |
| Machine Dimensions | 36”L x 67”W x 64”H (shipping dims) (approx) |
| Manufacture Date | N/A |
| EXTRAS: | One Pack (total of 10 - one on the machine nine in the box) 16” x 5/23” x 1” United Abrasives Type 1 Cutoff wheel for metal |
| Seller Note: | Unit is USED - BUT IN LIKE NEW CONDITION - UNIT WAS NEVER USED IN PRODUCTION - ONLY TEST CUTS WERE MADE - FACILITY CLOSED BEFORE SAW WAS PUT INTO PRODUCTION. There are some visible minor surface scratches and some minor wear but none affecting the functionality or the intended use of the unit. What you see in the pictures is what is included in sale There is ONE Pack of (10 total - one on the machine and 9 in the box) 16” x 5/32” x 1” Type 1 Cutoff wheels with the unit. This unit has been run and as such unit is being sold AS IS, WHERE-IS, AS-SHOWN. Pictures and video are of the actual unit being purchased. If the buyer has any questions, please feel free to ask. |
|
Kalamazoo K16-18 Industrial Cutoff Saw |
||||||
|
Manufacturer: |
Kalamazoo Industries, Inc. |
|||||
|
Model: |
K16-18 |
|||||
|
Serial No.: |
415353 |
|||||
|
Cutting Capacity: |
3” Solid & 4” Mild Steel w/ the correct cutoff wheel/blade |
|||||
|
Table Dimension: |
16”W x 28”D |
|||||
|
Table Vise: |
Fast, Foot Operated chain vise |
|||||
|
Saw Stand: |
Rigid Steel Base |
|||||
|
Abrasive Wheel Size: |
16” or 18” Diameter wheel |
|||||
|
Wheel RPM: |
2500 Spindle RPM |
|||||
|
On/Off Switch: |
Magnetic On/Off Switch |
|||||
|
Spark Chute: |
Efficient Spark Chute |
|||||
|
Drive Belt: |
Heavy Duty Steel Belt — With Heavy Duty Wheel & Belt Guards |
|||||
|
Motor Spec: |
10Hp TEFC 3-Phase |
|||||
|
Electrical Specs: |
240V, 3-Phase, 24amps, 50/60 Hz (unit is already wired for this voltage) |
|||||
|
Weight: |
Approx. 620lbs (shipping weight) |
|||||
|
Machine Dimensions: |
36”L x 57”W x 64”H (shipping dims) (approx) |
|||||
|
Manufacturer Date: |
N/A |
|||||
|
|
|
|||||
|
EXTRAS INCLUDED: |
One Pack (total of 10 - one on the machine nine in the box) 16” x 5/23” x 1” United Abrasives Type 1 Cutoff wheel for metal |
|||||
|
|
|
|||||
|
Seller Note: |
Unit is USED - BUT IN LIKE NEW CONDITION - UNIT WAS NEVER USED IN PRODUCTION - ONLY TEST CUTS WERE MADE - FACILITY CLOSED BEFORE SAW WAS PUT INTO PRODUCTION. There are some visible minor surface scratches and some minor wear but none affecting the functionality or the intended use of the unit. What you see in the pictures is what is included in sale There is ONE Pack of (10 total - one on the machine and 9 in the box) 16” x 5/32” x 1” Type 1 Cutoff wheels with the unit. This unit has been run and as such unit is being sold AS IS, WHERE-IS, AS-SHOWN. Pictures and video are of the actual unit being purchased. If the buyer has any questions, please feel free to ask. |
|||||
|
|
||||||
|
|
||||||
|
|
|
|||||
