| Manufacturer | Goessling USA, Inc. |
| Model | CA04 |
| Serial No. | 209 0626 |
| Belt Type | 8” Wide Hinged Metal Belt |
| Belt Speed | N/A |
| Belt Motion Control | Currently wired on a momentary switch - Can easily be changed out |
| In-Feed Hooper Dims | 29”W x 24”L x 19”D (approx.) Top of Hopper to Ground 22” (Approx.) |
| Chute Bottom | 65” to Ground |
| Chute Width | 11” (approx.) |
| Cleat Spacing | 3” (approx.) |
| Cleat Depth | 1” (approx.) |
| Conveyor Frame | Mild Steel Construction |
| Motor Horsepower | .75Hp |
| Electrical Specs | 115/230V / 8.4/4.32amps / Single Phase, 50/60 Hz |
| Weight | Approx. 400lbs |
| Overall Dimensions | 46”L x 30”W x 75"H(approx) Please See Pictures for other measurements |
| Manufacture Date | N/A |
| Seller Note: | Unit is USED / BUT IN VERY GOOD CONDITION. Conveyor shows very little signs of wear. Some scratching / blemishes / worn paint can seen on the conveyor. This unit has been tested as seen in the video and functions as intended. Unit is being sold AS-IS, WHERE-IS, AS-SHOWN. Pictures and video are of the actual unit being purchased. Full crating of the unit will be an extra cost, otherwise unit will only ship on pallet. If the buyer has any questions, please feel free to ask. As always, buyer is welcome to personally inspect and test unit at our facilities. |
|
Goessling 90° Up / Z Conveyor |
||||||
|
Manufacturer: |
Goessling USA, Inc. |
|||||
|
Model: |
CA04 |
|||||
|
Serial No.: |
209 0626 |
|||||
|
Belt Type: |
8” Wide Hinged Metal Belt |
|||||
|
Belt Speed: |
N/A |
|||||
|
Belt Motion Control: |
Currently wired on a momentary switch - Can easily be changed out |
|||||
|
In-Feed Hooper Dims: |
29”W x 24”L x 19”D (approx.) Top of Hopper to Ground 22” (Approx.) |
|||||
|
Chute Bottom: |
65” to Ground |
|||||
|
Chute Width: |
11” (approx.) |
|||||
|
Cleat Spacing: |
3” (approx.) |
|||||
|
Cleat Depth: |
1” (approx.) |
|||||
|
Conveyor Frame: |
Mild Steel Construction |
|||||
|
Motor Horsepower: |
.75Hp |
|||||
|
Electrical Specs: |
115/230V / 8.4/4.32amps / Single Phase, 50/60 Hz |
|||||
|
Weight: |
Approx. 400lbs |
|||||
|
Overall Dimensions: |
46”L x 30”W x 75"H(approx) Please See Pictures for other measurements |
|||||
|
Manufacturer Date: |
N/A |
|||||
|
|
|
|||||
|
Seller Note: |
Unit is USED / BUT IN VERY GOOD CONDITION. Conveyor shows very little signs of wear. Some scratching / blemishes / worn paint can seen on the conveyor. This unit has been tested as seen in the video and functions as intended. Unit is being sold AS-IS, WHERE-IS, AS-SHOWN. Pictures and video are of the actual unit being purchased. Full crating of the unit will be an extra cost, otherwise unit will only ship on pallet. If the buyer has any questions, please feel free to ask. As always, buyer is welcome to personally inspect and test unit at our facilities. |
|||||
|
|
||||||
|
|
||||||
|
|
|
|||||
