| Manufacturer | EMI Plastics Equipment |
| Model | EAC12- 48- 40 | Extruded Aluminum Frame Incline Belt Conveyor |
| Serial No. | 15-12179 |
| Belt Type | EA-266-48-12-48 |
| Belt Size & Type | 12”Wide x 48”Long | Corrugated Side |
| Belt Speed | 4 - 40 FPM w/Variable Speed Drive |
| Range of Height | 36”H (Top of Chute to Ground) 21.5”H (Bottom of Chute to Ground) |
| Max Load | 100lb Maximum |
| Infeed Hopper | 19”Wide Stainless Steel |
| Cleat Spacing | 4” (approx.) |
| Cleat Depth | 1-1/2” Deep |
| Conveyor Frame | Extruded Aluminum Frame |
| Electrical Specs | 1/3hp | 110V/115V/120V / 3.5amp / Single Phase, 50/60 Hz |
| Weight | Approx. 250lbs |
| Overall Dimensions | 41”L x 29”W x 52"H(approx) Please See Pictures for other measurements |
| Manufacturer Date | N/A |
| Seller Note: | Unit is USED / BUT IN GOOD CONDITION. Conveyor shows some signs of wear, scratching, stickers peeling, but none affecting the intended use of the conveyor. This unit has been tested as seen in the video and functions as intended. Belt runs smooth with no binding noted when running. Unit is being sold AS-IS, WHERE-IS, AS-SHOWN. Pictures and video are of the actual unit being purchased. Full crating of the unit will be an extra cost, otherwise unit will only ship on pallet. If the buyer has any questions, please feel free to ask. As always, buyer is welcome to personally inspect and test unit at our facilities. |
|
EMI Plastics Equipment EAC12 - 48 - 40 12” x 48’ Incline Belt Conveyor |
||||||
|
Manufacturer: |
EMI Plastics Equipment |
|||||
|
Model: |
EAC12- 48- 40 | Extruded Aluminum Frame Incline Belt Conveyor |
|||||
|
Serial No.: |
15-12179 |
|||||
|
Belt Type: |
EA-266-48-12-48 |
|||||
|
Belt Size & Type: |
12”Wide x 48”Long | Corrugated Side |
|||||
|
Belt Speed: |
4 - 40 FPM w/Variable Speed Drive |
|||||
|
Range of Height: |
36”H (Top of Chute to Ground) 21.5”H (Bottom of Chute to Ground) |
|||||
|
Max Load: |
100lb Maximum |
|||||
|
Indeed Hopper: |
19”Wide Stainless Steel |
|||||
|
Cleat Spacing: |
4” (approx.) |
|||||
|
Cleat Depth: |
1-1/2” |
|||||
|
Conveyor Frame: |
Stainless Steel Belt Pan |
|||||
|
Electrical Specs: |
1/3hp | 110V/115V/120V / 3.5amp / Single Phase, 50/60 Hz |
|||||
|
Weight: |
Approx. 250lbs |
|||||
|
Overall Dimensions: |
41”L x 29”W x 52"H(approx) Please See Pictures for other measurements |
|||||
|
Manufacturer Date: |
N/A |
|||||
|
|
|
|||||
|
Seller Note: |
Unit is USED / BUT IN GOOD CONDITION. The conveyor shows some signs of wear, scratching, stickers peeling, but none affecting the intended use of the conveyor. This unit has been tested as seen in the video and functions as intended. Belt runs smooth with no binding noted when running. Unit is being sold AS-IS, WHERE-IS, AS-SHOWN. Pictures and video are of the actual unit being purchased. Full crating of the unit will be an extra cost, otherwise unit will only ship on pallet. If the buyer has any questions, please feel free to ask. As always, buyer is welcome to personally inspect and test unit at our facilities. |
|||||
|
|
||||||
|
|
||||||
|
|
|
|||||
