Manufacturer | Berran / Eagle |
Model | T100 |
Serial No. | FC1179534 |
Tape Size | 3” |
Machine Type | Semi-Automatic Uniform Case Sealer |
Min. Box Dimension: | 6”L x 4.25W x 4.5H |
Max. Box Dimension | Infinite L x 19.75W x 19.75H |
Belt Drive | Side Belts |
Operating Rate | Up to 30 box per minute depending on box dimensions |
Electrical Specs | 110/120Volts, 60HZ, Single Phase |
Machine Dimensions | 35.125”W(Includes Mast Legs) x 43.75”L x 51.75”H (Height Varies) |
Manufacture Date | 2020 |
Machine Weight | 475lbs (approx.) |
Known Issues | Tape heads/rollers show some signs of wear but boxes run through the unit very smoothly. Tape is dispensed with no issues noted. Tape head/rollers might need to be replaced. (can be seen in the pictures) |
EXTRAS: | This taper does have both of the In-Feed Roller & Out-Feed Roller attachment / tables - Just not shown in the pictures. |
Seller Note: | Unit is USED. Some minor scratching/blemishes/bit of rust spots, but is not affecting the unit intended use. The unit was removed a working environment and was functioning as intended when removed from service. This unit has been tested as seen in the video. Unit is being sold AS-IS, WHERE-IS, AS-SHOWN. Pictures are of the actual unit being purchased. Crating of the unit will be an EXTRA COST, otherwise unit will only ship on pallet. If the buyer has any questions, please feel free to ask. As always, buyer is welcome to personally inspect and test unit at our facilities. |
Eagle T100 Carton Sealer Side Driven Belts Top and Bottom 3” Tape Heads Adjustable Carton Sealer |
||||||
Manufacturer: |
Berran / Eagle |
|||||
Model: |
T100 |
|||||
Serial No.: |
FC1179534 |
|||||
Tape Size: |
3” |
|||||
Machine Type: |
Semi-Automatic Uniform Case Sealer |
|||||
Min. Box Dimension: |
6”L x 4.25W x 4.5H |
|||||
Max. Box Dimension: |
Infinite L x 19.75W x 19.75H |
|||||
Belt Drive: |
Side Belts |
|||||
Operating Rate: |
Up to 30 box per minute depending on box dimensions |
|||||
Electrical Specs: |
110/120Volts, 60HZ, Single Phase |
|||||
Machine Dimensions: |
35.125”W(Includes Mast Legs) x 43.75”L x 51.75”H (Height Varies) |
|||||
Manufactured Date: |
2020 |
|||||
Machine Weight: |
475lbs (approx.) |
|||||
|
|
|||||
Extras: |
This taper does have both of the In-Feed Roller & Out-Feed Roller attachment / tables - Just not shown in the pictures. |
|||||
|
|
|||||
Known Issues: |
Tape heads/rollers show some signs of wear but boxes run through the unit very smoothly. Tape is dispensed with no issues noted. Tape head/rollers might need to be replaced. (can be seen in the pictures) |
|||||
|
|
|||||
Seller Note: |
Unit is USED. Some minor scratching/blemishes/bit of rust spots, but is not affecting the unit intended use. The unit was removed a working environment and was functioning as intended when removed from service. This unit has been tested as seen in the video. Unit is being sold AS-IS, WHERE-IS, AS-SHOWN. Pictures are of the actual unit being purchased. Crating of the unit will be an EXTRA COST, otherwise unit will only ship on pallet. If the buyer has any questions, please feel free to ask. As always, buyer is welcome to personally inspect and test unit at our facilities. |
|||||
|
||||||
|
||||||
|
|