Type
Baggers
Manufacturer
AUTOMATED PACKAGING SYSTEMS
Model
60" SPrint SidePouch Bagger/Sealer
Year
Stock #
01A-1108
Condition
Used
Manufacturer | Automated Packaging Systems, LLC |
Model | 60” SPrint Side Pouch Bagger / Sealer |
SPrint Sealer Serial No.: | 0105SPS151 |
Part No.: | 471079A1 |
SPrint Loader Serial No.: | 0105SPL151 |
Machine Weight | Approx. 350-400lbs Load Section || Approx. 150lbs Sealer Section |
Bag Size: | W: 2.63 to 20 inches L: 3 to 18.75 inches |
Bag Thickness: | 1.5 to 4.0mil |
Pass Thru: | Up to 5” |
Operating Rate: | 70 bags/minute in intermittent mode /// Up to 120 bags/minute in continuous mode |
Air Specs | 60psi of clean, dry air |
Frame Material: | Stainless Steel |
Electrical Specs: | 120Volts, 20amps, Single Phase, 60HZ, 2400Watts |
Manufacture Date | N/A |
Overall Dimensions | 60V - 168”L x 32”W x 36”H (Pallet Dimensions will be larger) |
Dimensions | 168”L x 32”W x 36”H |
Autobag SPrint 60” SidePouch Bagger |
||||||
Manufacturer: |
Automated Packaging Systems, LLC |
|||||
SPrint Model: |
60” SPrint Side Pouch Bagger / Sealer |
|||||
SPrint Sealer Serial No.: |
0105SPS151 |
|||||
Part No.: |
471079A1 |
|||||
SPrint Loader Serial No.: |
0105SPL151 |
|||||
Part No.: |
471084A3 |
|||||
Bag Sizes: |
W: 2.63 to 20 inches L: 3 to 18.75 inches |
|||||
Bag Thickness: |
1.5 to 4.0mil |
|||||
Pass Thru: |
Up to 5” |
|||||
Operational Speed: |
70 bags/minute in intermittent mode /// Up to 120 bags/minute in continuous mode |
|||||
Air Supply: |
60psi of clean, dry air |
|||||
Frame Material: |
Stainless Steel |
|||||
Electrical Specs: |
120Volts, 20amps, Single Phase, 60HZ, 2400Watts |
|||||
Manufactured Date: |
N/A |
|||||
Overall Dimensions: |
60V - 168”L x 32”W x 36”H (Pallet Dimensions will be larger) |
|||||
Weight: |
Approx. 350-400lbs Load Section || Approx. 150lbs Sealer Section |
|||||
|
|
|||||
Seller Note: |
The unit being sold is USED **There are some “custom”(seal flatteners/package stuffer/coupon depositor) accessories on this unit as it was used in packaging ladies' hosiery** and shows some signs of wear and tear. This unit has been gone through and tested with no major issues noted. The unit has been removed from a working environment and was functioning as intended when it was taken out of service. There are NO EXTRAS INCLUDED, besides what you see with the unit pictured. This unit has been tested as seen in the video. Unit is being sold AS-IS, WHERE-IS, AS-SHOWN. Pictures and video are of the actual unit being purchased. Full crating of the unit will be an extra cost, otherwise unit will only ship on pallet. If the buyer has any questions, please feel free to ask. As always, buyer is welcome to personally inspect and test unit at our facilities. |
|||||
|
||||||
|
||||||
|
|
|||||
SPrint Benefits: |
|