Amada HA-400W Automatic Band Saw w/ 16” Capacity


HA-400W Automatic Bandsaw


Stock #



Manufacturer Amada Co., LTD
Model HA-400W Automatic Bandsaw
Serial No. 45650240
Manufacture Date 2006
Saw Blade 15”L x 0.050”T x 1-1/2”W
Blade Speed 50 - 295ft./min, 60hz Stepless
Work Load Cap 5511lbs
Cutting Capacity Round: 1.18” - 16” Rectangle: 16”W x 16H”
Saw Blade Motor 7HP
Cutting Fluid Cap 31.5 Gallons - Electric Pump
Chip Disposal Conveyor
Blade Control Top Limit Setting — Auto Setting with Quick Approach Feeler
Electrical Specs 220/230Volts, 3-Phase, 50/60HZ // 440V, 3-Phase, 60Hz
Index Mechanism Shuttle Vise Type - Stroke: 19.6” (Max 9 times index) Length: 0.394”-177’” Remnant Length: 3”
Table Height 31.5” Above Floor
Machine Dimensions 90”W x 106.3”L x 62.4”H Approx.
Weight Approx. 4851lbs
EXTRAS: Both Roller Conveyors seen in photo either side of the unit are included in the sale of the saw
Seller Note: Units is USED. Some minor scratching/blemishes/oil film along with signs of other wear on paint can be seen on the surfaces of the unit, but is not affecting the unit intended use. The unit was removed a working environment as seen in the pictures and was functioning as intended when removed from service. This unit was recently removed from production. Unit has been removed from the facility seen in the pictures and is being stored in our facility. Unit is being sold ***AS-IS, WHERE-IS, AS-SHOWN.*** *** PLEASE DO NOT ASSUME THERE IS MORE TO IT. IF YOU ARE UNCERTAIN PLEASE BE SURE TO ASK PRIOR TO PURCHASING***. Pictures are of the actual unit being purchased. If the buyer has any questions, please feel free to ask. As always, buyer is welcome to personally inspect and test unit at our facilities.