Manufacturer | ADCO Manufacturing |
Model | 15DBC105 |
Serial No. | 5423HG |
Machine Type | Automatic, Horizontal, Continuous Motion, Hot Melt Glue Cartoner |
Carton Per Minute | 25 to 120 cartons per/min (depending on material and application) |
Carton Size Range | 1" to 9½" in Length || .75” to 3” in Width || 4” to 12” Depth |
Feed Conveyor | 140” long, lugged product in-feed |
Discharge Conveyor | 32” Long Dual Side-belt Discharge Conveyor |
Glue Pot | Nordson ProBlue Glue Hot Melt Glue System |
Controls / HMI | A/B PLC Control along with A/B PanelView Touch Screen |
Frame Construction | Stainless Steel Frame Mounted on Casters along w/Leveling legs (Non-Wash Down) |
Air Consumption | 10-cfm @ 95PSI |
Electrical Specs | 230-460Volts / 3-Phase / 30amps / 60Hz |
Machine Dimensions | 360”L x 90”W x 72”H (approx.) |
Manufactured Date | 2013 |
Weight | N/A |
Seller Note: | Unit is USED and in VERY GOOD CONDITION. Unit shows signs of some visible minor surface wear, minor dents/dings, otherwise not affecting intended use of the unit. No issues with the unit when it was last run. We have not powered the unit since it was shutdown previously. What you see in the pictures is what is included in sale (PLEASE ASK IF YOU SEE SOMETHING NOT RELEVANT TO THE UNIT IF ITS INCLUDED). What you see in the pictures is what is included in sale. The ADCO can be powered if the customer submits a PO. Unit is being sold AS-IS, WHERE-IS, AS-SHOWN. Pictures are of the actual unit being purchased. If the buyer has any questions, please feel free to ask. Buyer is always welcome to inspect the unit before purchasing at our location. |
ADCO Manufacturing Model: 15DBC105 Automatic Load Cartoner |
||||||
Manufacturer: |
ADCO Manufacturing |
|||||
Model: |
15DBC105 |
|||||
Serial No.: |
5423HG |
|||||
Machine Type: |
Automatic, Horizontal, Continuous Motion, Hot Melt Glue Cartoner |
|||||
Carton Per Minute: |
25 to 120 cartons per/min (depending on material and application) |
|||||
Carton Size Range: |
1" to 9½" in Length || .75” to 3” in Width || 4” to 12” Depth |
|||||
Feed Conveyor: |
140” long, lugged product in-feed |
|||||
Discharge Conveyor: |
32” Long Dual Side-belt Discharge Conveyor |
|||||
Glue Pot: |
Nordson ProBlue Glue Hot Melt Glue System |
|||||
Controls / HMI: |
A/B PLC Control along with A/B PanelView Touch Screen |
|||||
Frame Construction: |
Stainless Steel Frame Mounted on Casters along w/Leveling legs (Non-Wash Down) |
|||||
Air Consumption: |
10-cfm @ 95PSI |
|||||
Electrical Specs: |
230-460Volts / 3-Phase / 30amps / 60Hz |
|||||
Machine Dimensions: |
360”L x 90”W x 72”H (approx.) |
|||||
Manufactured Date: |
2013 |
|||||
Weight: |
N/A |
|||||
|
|
|||||
Seller Note: |
Unit is USED and in VERY GOOD CONDITION. Unit shows signs of some visible minor surface wear, minor dents/dings, otherwise not affecting intended use of the unit. No issues with the unit when it was last run. We have not powered the unit since it was shutdown previously. What you see in the pictures is what is included in sale (PLEASE ASK IF YOU SEE SOMETHING NOT RELEVANT TO THE UNIT IF ITS INCLUDED). What you see in the pictures is what is included in sale. The ADCO can be powered if the customer submits a PO. Unit is being sold AS-IS, WHERE-IS, AS-SHOWN. Pictures are of the actual unit being purchased. If the buyer has any questions, please feel free to ask. Buyer is always welcome to inspect the unit before purchasing at our location. |
|||||
|
||||||
|
||||||
|
|