Accutek Packaging Equipment Model: S.A. CHK Capper / Torquer


Semi-Automatic Chuck Capper/Torquer // S.A. CHK Capper


Stock #



Manufacturer Accutek Packaging Equipment Companies
Model Semi-Automatic Chuck Capper/Torquer // S.A. CHK Capper
Serial No. A-17 203735
Chuck Size 20 (Accutek Model)
Manufacture Date March 2003
Electrical Specs 110Volts / N/Aamps / 60HZ
Air Specs 70psi min
Overall Dimensions 24”W x 20”D x 63”H
Weight 80lbs (approx)

Equipped With

Accutek Packaging Equipment

Model: S.A. CHK Capper / Torquer


Accutek Packaging Equipment Companies


Semi-Automatic Chuck Capper/Torquer  // S.A. CHK Capper

Serial No.:

A-17 203735

Chuck Size:

20 (Accutek Model)

Manufactured Date:

March, 2003

Electrical Specs:

110Volts / N/Aamps / 60HZ 

Air Requirments:

70psi min

Overall Dimensions:

24”W x 20”D x 63”H


80lbs (approx)




One of the air cylinders does leak some air. Some of the air lines will need to be replaced as some are becoming brittle and stiff. The attachments on the lower right leg, attach to a conveyor when the unit is all set-up; to automatically advance to the next bottle on the conveyor.


Someone will need to have some knowledge to set-up the capper. It is not a plug and play unit. This unit could be set up to run manually possibly.



Seller Note:

Unit is USED. Some minor scratching/blemishes/ rust spots along with signs of other wear on paint can be seen on the surfaces of the unit. The unit was removed a working environment and was functioning as intended when removed from service. The unit has been test as seen in the video. Unit is being sold ***AS-IS, WHERE-IS, AS-SHOWN.*** *** PLEASE DO NOT ASSUME THERE IS MORE TO IT. IF YOU ARE UNCERTAIN PLEASE BE SURE TO ASK PRIOR TO PURCHASING***. Pictures and video are of the actual unit being purchased. If the buyer has any questions, please feel free to ask. As always, buyer is welcome to personally inspect and test unit at our facilities.