Manufacturer
AARON PROCESS EQUIPMENT
Model
11-Cu.Ft. Jacketed Ribbon Blender
Year
Stock #
90-XXAE
Condition
Very Good
Manufacturer | Aaron Process Equipment |
Model | 11-Cu.Ft. Jacketed Ribbon Blender (approx.) |
Serial No. | N/A |
Discharge Outlet | Bottom Discharge 6” Fitting |
Horsepower | 5-HP |
Trough Size | 48”L x 24”W x 28”D || Straight side is 18” |
Working Capacity | 11 Cu.Ft. (approx.) |
Full Capacity | 12 Cu.Ft. (approx.) |
Material | Stainless Steel |
Manufacture Date | N/A |
Electrical Specs | 127/220V, Single Phase, 25.8/11.1amps, 60Hz, 1740rpm max |
Overall Dimensions | 240/460V, Three Phase, 14.2 / 7.1amps, 60Hz, 1740rpm max |
Weight | Approx: 1000lbs (approx.) |
Seller Note: | Unit is USED with visible minor surface wear and some minor scratches/scuffs along with some cosmetic marks none affecting the functionality or the intended use of the unit. Unit condition overall is clean with some dried debris on the inside that can be cleaned out / removed. Unit was removed from a working environment with no issues noted when removed (not able to verify exact previous product mixed with ribbon blender). What you see in the pictures is what is included in sale (Skidding/Palletizing IS NOT included with the sale, but can be purchased at an extra cost). This unit has been run and tested with no issues noted. Unit is being sold AS-IS, WHERE-IS, AS-SHOWN. Pictures are of the actual unit being purchased. If the buyer has any questions, please feel free to ask. |
EXTRAS: | This ribbon blenders jacket has been pressure tested to the recommended 45psi. No leaks in the jacket were observed and pressure held. Picture of press gauge can be seen along with it in the video of the pressure being released |
Aaron Equipment Jacketed 11-Cu.Ft. Ribbon Blender |
||||||
Manufacturer: |
Aaron Process Equipment |
|||||
Model: |
11-Cu.Ft. Jacketed Ribbon Blender (approx.) |
|||||
Serial No.: |
N/A |
|||||
Jacketed Bowl: |
Yes |
|||||
Horsepower: |
5-HP |
|||||
Trough Size: |
48”L x 24”W x 28”D || Straight side is 18” |
|||||
Working Capacity: |
11 Cu.Ft. (approx.) |
|||||
Full Capacity: |
12 Cu.Ft. (approx.) |
|||||
Material: |
Stainless Steel |
|||||
Discharge: |
Bottom Discharge 6” Fitting |
|||||
Height to Discharge: |
52” (approx.) w/o valve |
|||||
Electrical Specs: |
240/460V, Three Phase, 14.2 / 7.1amps, 60Hz, 1740rpm max |
|||||
Manufacture Date: |
N/A |
|||||
Overall Dimensions: |
87”W x 28”L x 84”D (approx.) |
|||||
Weight: |
Approx: 1000lbs (approx.) |
|||||
|
|
|||||
EXTRA: |
This ribbon blender jacket has been pressure tested to the recommended 45psi. No leaks in the jacket were observed and pressure was held. A picture of press gauge can be seen along with it in the video of the pressure being released |
|||||
|
|
|||||
Seller Note: |
Unit is USED with visible minor surface wear and some minor scratches/scuffs along with some cosmetic marks on the trough/bowl but none affecting the functionality or the intended use of the unit. Unit condition overall is clean with some dried debris on the inside that can be cleaned out / removed. Unit was removed from a working environment with no issues noted when removed (not able to verify exact previous product mixed with ribbon blender). What you see in the pictures is what is included in sale (Skidding/Palletizing IS NOT included with the sale, but can be purchased at an extra cost). This unit has been run, tested and pressure tested with no issues noted. Unit is being sold AS-IS, WHERE-IS, AS-SHOWN. Pictures are of the actual unit being purchased. If the buyer has any questions, please feel free to ask. |
|||||
|
||||||
|
||||||
|
|