3M-Matic 200a w/ 2” Top and Bottom Taper Heads Adjustable Case Sealer

Manufacturer
3M

Model
200a

Year

Stock #

Condition
Very Good

Specifications

Manufacturer 3M Company
Model 200a
Serial No. 11228
Type 39600
Tape Size 2”
Belt Speed 100fpm
Operating Rate Up to 40 box per minute depending on box dimensions
Electrical Specs 115Volts, 220Watts, 1.9amps, 60HZ
Machine Dimensions 31”W(Includes Mast Legs) x 36.5”L x Height Varies: Min:53” // Max:90” with masts up (measured to top of tape roll)
Roller In-Feed Dimensions 18”L x 24.5”W
Shipping Dimensions 38”L x 33”W x 49”H (Pallet Dimensions)
Shipping Weight 375lbs
Machine Weight 272lbs
Seller Note: Units is USED. Some minor scratching/blemishes/bit of rust on paint can be seen on the surfaces of the unit, but is not affecting the unit intended use. The unit was removed a working environment and was functioning as intended when removed from service. This unit has been tested as seen in the video. Unit is being sold AS-IS, WHERE-IS, AS-SHOWN. Pictures are of the actual unit being purchased. Unit is bolted to a skid and shrink wrapped ready for quick shipping. Crating of the unit will be an EXTRA COST, otherwise unit will only ship on pallet as seen in the pictures. If the buyer has any questions, please feel free to ask. As always, buyer is welcome to personally inspect and test unit at our facilities.

Equipped With

Box Dimension Capacity:
Length: 6” to unlimited  (152mm to unlimited)
Width: 6” to 21.5”  (152mm to 546mm)
Height: 4.75” to 24.6”  (121mm to 622mm)
Box Weights: 5 - 85lbs  (3 - 38kg)  Machine prefers heavier boxes due to bottom belt

Extras: Both tape heads have been gone thru and rollers have all been replaced with new ones.
             There is an Optional Roller In-Feed Table, Extra Cutting Blades, and Caster Wheels INCLUDED.
             Caster wheels are in the box under the unit in the pictures.

Videos