Overview

Make
EAGLE
Model
T100 Case Sealer
Type
Manual and Semi Automatic Case Taper
Year
2020
Condition
Very Good
Stock #
90-EGCS

Specifications

Manufacturer
Berran / Eagle
Model
T100
Serial No.
FC1179534
Tape Size
3”
Machine Type
Semi-Automatic Uniform Case Sealer
Min. Box Dimension:
6”L x 4.25W x 4.5H
Max. Box Dimension
Infinite L x 19.75W x 19.75H
Belt Drive
Side Belts
Operating Rate
Up to 30 box per minute depending on box dimensions
Electrical Specs
110/120Volts, 60HZ, Single Phase
Machine Dimensions
35.125”W(Includes Mast Legs) x 43.75”L x 51.75”H (Height Varies)
Manufacture Date
2020
Machine Weight
475lbs (approx.)
Known Issues
Tape heads/rollers show some signs of wear but boxes run through the unit very smoothly. Tape is dispensed with no issues noted. Tape head/rollers might need to be replaced. (can be seen in the pictures)
EXTRAS:
This taper does have both of the In-Feed Roller & Out-Feed Roller attachment / tables - Just not shown in the pictures.
Seller Note:
Unit is USED. Some minor scratching/blemishes/bit of rust spots, but is not affecting the unit intended use. The unit was removed a working environment and was functioning as intended when removed from service. This unit has been tested as seen in the video. Unit is being sold AS-IS, WHERE-IS, AS-SHOWN. Pictures are of the actual unit being purchased. Crating of the unit will be an EXTRA COST, otherwise unit will only ship on pallet. If the buyer has any questions, please feel free to ask. As always, buyer is welcome to personally inspect and test unit at our facilities.

Spec Sheet

Eagle T100 Carton Sealer

Side Driven Belts

Top and Bottom 3” Tape Heads 

Adjustable Carton Sealer

Manufacturer:

Berran / Eagle

Model:

T100

Serial No.:

FC1179534

Tape Size:

3”

Machine Type:

Semi-Automatic Uniform Case Sealer

 Min. Box Dimension:

6”L x 4.25W x 4.5H

Max. Box Dimension:

Infinite L x 19.75W x 19.75H

Belt Drive:

Side Belts

Operating Rate:

Up to 30 box per minute depending on box dimensions

Electrical Specs:

110/120Volts, 60HZ, Single Phase

Machine Dimensions:

35.125”W(Includes Mast Legs) x 43.75”L x 51.75”H (Height Varies)

Manufactured Date:

2020

Machine Weight:

475lbs (approx.)

 

 

Extras:

This taper does have both of the In-Feed Roller & Out-Feed Roller attachment / tables - Just not shown in the pictures.

 

 

Known Issues:

Tape heads/rollers show some signs of wear but boxes run through the unit very smoothly. Tape is dispensed with no issues noted. Tape head/rollers might need to be replaced. (can be seen in the pictures)

 

 

Seller Note:

Unit is USED. Some minor scratching/blemishes/bit of rust spots, but is not affecting the unit intended use. The unit was removed a working environment and was functioning as intended when removed from service. This unit has been tested as seen in the video. Unit is being sold AS-IS, WHERE-IS, AS-SHOWN. Pictures are of the actual unit being purchased. Crating of the unit will be an EXTRA COST, otherwise unit will only ship on pallet. If the buyer has any questions, please feel free to ask. As always, buyer is welcome to personally inspect and test unit at our facilities. 

 

 

 

 

Request a Quote