1 / 33

Excellent

HEAT SEAL Model: HS-115 & HS-115T || Combination L-Bar Sealer & Heat Tunnel

Stock #90-3459

Overview

Manufacturer: HEAT SEAL, LLC.
Model: HS-115 & HS115T - Series W || Hot Wire Seal Jaw
Serial No.: L1A15126 & LKA15127
L-Bar Seal Area: 20”L x 15”W
Film Size: 17” Wide (430mm)
Load Station Height: 35” High (890mm)
Tunnel Passage Dims: 20”L x 14.5”W x 6”H (530mm x 370mm x 152mm)
Conveyor Speed: 0-20FPM (Up to .1m/s)
Electrical Specs: 115VAC, 20amps, 1-Phase, 60Hz
Power Usage: Tunnel: 2000Watts Conveyor Belt: 500Watts
Manufacture Date: 2/1/2002
Overall Machine Dims: 24”W x 85”L x 50”H (Approx) Mounted on casters for easy mobility
Weight: 375lbs (approx) (159kg) (approx.)
Seller Note:: Unit is USED but in LIKE EXCELLENT CONDITION. Very little scratching/blemishes can be seen on the surfaces of the L-Bar Sealer, but none affecting the unit intended use. The unit was removed a working environment and was functioning as intended when removed from service. Unit has been tested and run at our facility. The unit is being sold AS-IS, WHERE-IS, AS-SHOWN. Pictures and videos are of the actual unit being purchased. If the buyer has any questions, please feel free to ask. As always, buyer is welcome to personally inspect and test the unit at our facilities.

HEAT SEAL Model: HS-115 & HS-115T Combination L-Bar Sealer & Heat Tunnel
Manufacturer:	HEAT SEAL, LLC.
Model:	HS-115 & HS115T - Series W \|\| Hot Wire Seal Jaw
Serial No.:	L1A15126 & LKA15127
L-Bar Seal Area:	20”L x 15”W
Film Size:	17” Wide (430mm)
Load Station Height:	35” High (890mm)
Tunnel Passage Dims:	20”L x 14.5”W x 6”H (530mm x 370mm x 152mm)
Conveyor Speed:	0-20FPM (Up to .1m/s)
Electrical Specs:	115VAC, 20amps, 1-Phase, 60Hz
Power Usage:	Tunnel: 2000Watts Conveyor Belt: 500Watts
Manufacture Date:	2/02
Overall Dimensions:	24”W x 85”L x 50”H (Approx) Mounted on casters for easy mobility
Weight:	375lbs (approx) (159kg) (approx.)

Seller Notes:	Unit is USED but in LIKE EXCELLENT CONDITION. Very little scratching/blemishes can be seen on the surfaces of the L-Bar Sealer, but none affecting the unit's intended use. The unit was removed a working environment and was functioning as intended when removed from service. Unit has been tested and run at our facility with no issues noted. The unit is being sold AS-IS, WHERE-IS, AS-SHOWN. Pictures and videos are of the actual unit being purchased. If the buyer has any questions, please feel free to ask. As always, buyer is welcome to personally inspect and test the unit at our facilities.