Manufacturer: |
Amada Co., LTD |
Model |
HFA-400W NC Horizontal Automatic Metal Cutting Band Saw |
Serial No. |
40660264 |
Manufactured Date |
1995 |
Saw Blade |
50 - 295ft./min, 60Hz Stepless |
Blade Speed |
50 - 295ft./min, 60Hz Stepless |
Work Load Cap |
5511lbs |
Cutting Capacity |
Round: 1.18” - 16.54” Rectangle: 1.18”W x 0.5”H - 16”W x 16H” |
Saw Blade Motor |
8HP |
Cutting Fluid Cap |
31.5 Gallons |
Chip Disposal |
Conveyor |
Blade Control |
Top Limit Setting — Auto Setting with Quick Approach Feeler |
Electrical Specs |
230Volts, 3-Phase, 50/60HZ // 460Volts, 3-Phase, 60HZ |
Index Mechanism |
Shuttle Type - Stroke: 19.6” Length: 0.39” - 999.999” Remnant Length: 3” |
Table Height |
31.5” Above Floor |
Machine Dimensions |
90”W x 106.3”L x 62.4”H Approx. |
Weight |
Approx. 4851lbs |
Features |
Amada HFA400W Horizontal Automatic Band Saw The Horizontal NC Controlled Full Automatic Metal Cutting Band Saw by Amada. Fully automatic band saws with very accurate material indexing controlled by NC-positioning. Cutting Capacity, Round (Diameter): 0.5″ – 16″ |
Seller Notes |
Units is USED. Some minor scratching/blemishes/oil film along with signs of other wear on paint can be seen on the surfaces of the unit, but is not affecting the unit intended use. The unit was removed a working environment as seen in the pictures and was functioning as intended when removed from service. This unit was recently removed from production. Unit has been removed from the facility seen in the pictures and is being stored in our facility. Unit is being sold ***AS-IS, WHERE-IS, AS-SHOWN.*** *** PLEASE DO NOT ASSUME THERE IS MORE TO IT. IF YOU ARE UNCERTAIN PLEASE BE SURE TO ASK PRIOR TO PURCHASING***. Pictures are of the actual unit being purchased. If the buyer has any questions, please feel free to ask. As always, buyer is welcome to personally inspect and test unit at our facilities. |
EXTRAS: |
Both Roller Conveyors seen in photo either side of the unit are included in the sale of the saw |