Seinmex 5 Cu.Ft. Ribbon Blender

Stock #90-3455

Overview

Manufacturer: Seinmax
Model: N/A
Serial No.: N/A
Horsepower: 1.15-HP
Trough Size: 27.5”W x 20”L x 15”D
Working Capacity: 5 Cu.Ft. /// 37 gallons
Full Capacity: 7 Cu.Ft. /// 52 gallons
Solids Agitator: Air Agitator attached to side of the bowl
Material: Stainless Steel
Manufacture Date: N/A
Electrical Specs: 127/220V, Single Phase, 25.8/11.1amps, 60Hz, 1740rpm max
Overall Dimensions: 44”W x 44”L x 56”D (approx.)
Weight: Approx: 300lbs (approx.)
Seller Note:: Unit is USED with visible minor surface wear and some minor scratches/scuffs along with some cosmetic marks none affecting the functionality or the intended use of the unit. Unit condition overall is clean with some dried debris on the inside that can be cleaned out / removed. Unit was removed from a working environment with no issues noted when removed (not able to verify exact previous product mixed with ribbon blender). What you see in the pictures is what is included in sale (Skidding/Palletizing IS NOT included with the sale, but can be purchased at an extra cost). This unit has been run and tested with no issues noted. Unit is being sold AS-IS, WHERE-IS, AS-SHOWN. Pictures are of the actual unit being purchased. If the buyer has any questions, please feel free to ask.

Seinmex 5 Cu.Ft. Ribbon Blender
Manufacturer:	Seinmax
Model:	N/A
Serial No.:	N/A
Horsepower:	1.15-HP
Trough Size:	27.5”W x 20”L x 15”D
Working Capacity:	5 Cu.Ft. /// 37 gallons
Full Capacity:	7 Cu.Ft. /// 52 gallons
Agitator:	Air Agitator attached to the side of the bowl
Material:	Stainless Steel
Discharge:	Bottom Discharge 3” Sanitary Fitting with Valve
Electrical Specs:	127/220V, Single Phase, 25.8/11.1amps, 60Hz, 1740rpm max
Manufacture Date:	N/A
Overall Dimensions:	44”W x 44”L x 56”D (approx.)
Weight:	Approx: 300lbs (approx.)

Seller Note:	Unit is USED with visible minor surface wear and some minor scratches/scuffs along with some cosmetic marks none affecting the functionality or the intended use of the unit. Unit condition overall is clean with some dried debris on the side that can be cleaned out / removed. Unit was removed from a working environment with no issues noted when removed (not able to verify exact previous product mixed with ribbon blender). What you see in the pictures is what is included in sale (Skidding/Palletizing IS NOT included with the sale, but can be purchased at an extra cost). This unit has been run and tested with no issues noted. Unit is being sold AS-IS, WHERE-IS, AS-SHOWN. Pictures are of the actual unit being purchased. If the buyer has any questions, please feel free to ask.