Overview

Make
GOESSLING
Model
CA04
Type
Conveyors, Elevating
Condition
Very Good
Stock #
90-3555

Specifications

Manufacturer
Goessling USA, Inc.
Model
CA04
Serial No.
209 0626
Belt Type
8” Wide Hinged Metal Belt
Belt Speed
N/A
Belt Motion Control
Currently wired on a momentary switch - Can easily be changed out
In-Feed Hooper Dims
29”W x 24”L x 19”D (approx.) Top of Hopper to Ground 22” (Approx.)
Chute Bottom
65” to Ground
Chute Width
11” (approx.)
Cleat Spacing
3” (approx.)
Cleat Depth
1” (approx.)
Conveyor Frame
Mild Steel Construction
Motor Horsepower
.75Hp
Electrical Specs
115/230V / 8.4/4.32amps / Single Phase, 50/60 Hz
Weight
Approx. 400lbs
Overall Dimensions
46”L x 30”W x 75"H(approx) Please See Pictures for other measurements
Manufacture Date
N/A
Seller Note:
Unit is USED / BUT IN VERY GOOD CONDITION. Conveyor shows very little signs of wear. Some scratching / blemishes / worn paint can seen on the conveyor. This unit has been tested as seen in the video and functions as intended. Unit is being sold AS-IS, WHERE-IS, AS-SHOWN. Pictures and video are of the actual unit being purchased. Full crating of the unit will be an extra cost, otherwise unit will only ship on pallet. If the buyer has any questions, please feel free to ask. As always, buyer is welcome to personally inspect and test unit at our facilities.

Spec Sheet

Goessling 90° Up / Z Conveyor

Manufacturer:

Goessling USA, Inc.

Model:

CA04

Serial No.:

209 0626

Belt Type:

8” Wide Hinged Metal Belt

Belt Speed: 

N/A

Belt Motion Control:

Currently wired on a momentary switch - Can easily be changed out

In-Feed Hooper Dims:

29”W x 24”L x 19”D (approx.)  Top of Hopper to Ground 22” (Approx.)

Chute Bottom:

65” to Ground

Chute Width:

11” (approx.)

Cleat Spacing:

3” (approx.)

Cleat Depth:

1” (approx.)

Conveyor Frame:

Mild Steel Construction

Motor Horsepower:

.75Hp

Electrical Specs:

115/230V / 8.4/4.32amps / Single Phase, 50/60 Hz

Weight:

Approx. 400lbs

  Overall Dimensions:

46”L x 30”W x 75"H(approx) Please See Pictures for other measurements

Manufacturer Date:

N/A

 

 

Seller Note:

Unit is USED / BUT IN VERY GOOD CONDITION. Conveyor shows very little signs of wear. Some scratching / blemishes / worn paint can seen on the conveyor. This unit has been tested as seen in the video and functions as intended. Unit is being sold AS-IS, WHERE-IS, AS-SHOWN. Pictures and video are of the actual unit being purchased. Full crating of the unit will be an extra cost, otherwise unit will only ship on pallet. If the buyer has any questions, please feel free to ask. As always, buyer is welcome to personally inspect and test unit at our facilities. 

 

 

 

 

Request a Quote